JVC KW-M785BW Instruction Manual page 35

Settings Settings
3
1
Select the speaker type (
size of the selected speaker (
display the <X'over> screen (
Speaker Select
16 cm
• If a speaker is not connected, select [None].
• When setting the front speakers, select the
speaker size for <Tweeter>.
4
Adjust the crossover frequency of the
selected speaker.
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
X'over
Front
[dB]
TW Gain 0dB
Gain 0dB
HPF FREQ 30Hz
Slope -24dB/Oct
Eg. when adjusting <X'over> for front speakers
<Gain>/<TW Gain>
), select the
Adjusts the output volume of respective speaker.
2
), and then
<HPF FREQ>/<LPF FREQ>
3
).
Adjusts the crossover frequency for respective
speaker.
<Slope>
Adjusts the crossover slope for respective speaker.
<Phase>
Select the phase for the speaker.
<Time Alignment>
This setting improves the sound field for the seats you
select.
<Position>
You can select either <Listening Position> or <Front
Focus> on the screen. You cannot use both setting at
the same time.
[Hz]
<Listening Position>
This setting is used for both 2-way speaker system and
3-way speaker system.
1
Specify your favorite listening position.
1 Touch [Listening Position].
2 Select the listening position – [All] (Initial),
[Front L], [Front R] or [Front All]*.
3 Touch [Adjust].
Position
Listening Position Front Focus
Front L Front R
Front All All
Adjust
* [Front All] is selectable only when <X'over Network> is set
to [2 way].
2
Touch [Distance] (1), and then enter the
distance from your listening position to
each speaker (2).
106 cm
106 cm
0.00 ms
0.00 ms
106 cm 106 cm
0.00 ms 0.00 ms
106 cm
0.00 ms
ENGLISH 33