Cameras - JVC KW-M785BW Instruction Manual

Other External Components Other External Components
Only for [AV-IN]: Displays the <Aspect>
[ ]
setting screen.
• Touch [ Aspect] to select the aspect
ratio.
<Full>: For 16:9 original pictures
4:3 signal 16:9 signal
<Normal>: For 4:3 original pictures
4:3 signal 16:9 signal
Displays the <Screen Adjustment>
[ ]
screen (page 37).

Cameras

Install the cameras (separately purchased) in the
appropriate position according to the instructions
supplied with the cameras.
Connecting a rear view camera
See page 47.
• To use the rear view camera, a reverse lead (REVERSE)
connection is required (page 48) .
Connecting a camera to the AV-IN
terminals
See page 47.
• When connecting the external camera to the AV-IN
terminals, select [Camera] for the <AV Input>
setting (page 39).
For the rear view camera: The rear view screen
is displayed by shifting the gear to the reverse (R)
position when <Rear Camera Interruption> is set to
[ON] (page 38).
• A caution message appears on the screen. To
remove the caution message, touch the screen.
Watching camera view
1
Display the camera view.
From the Home screen (page 3), touch as
follows:
The camera view screen of one of the connected
camera is displayed.
2
Change the camera view.
Touch the upper portion of the screen shown
below.
• Each time you touch, camera view changes rear
view camera and AV-IN camera alternately.
To display parking guide line
(Only for the rear view camera)
Touch the area shown below, or set <Parking
Guidelines> to [ON] (page 38) .
• To close the parking guidelines, touch the same area
again.
To exit the camera screen
Press the / button on the monitor panel or touch
the area shown below.
• When the gear is released from the reverse (R)
position, the screen also return to the previous
playback source screen.
ENGLISH 25