Removing The Passenger Seat; Mounting The Passenger Seat - KTM 1290 Super Adventure S Owner's Manual

13 SERVICE WORK ON THE CHASSIS
13.3
13.4
180

Removing the passenger seat

H02100-10

Mounting the passenger seat

401680-11
–
Insert the Race‑on key or the black ignition key into the seat
1
lock and turn clockwise.
–
Raise the front of the passenger seat, pull toward the fuel
tank, and take off from above.
–
Remove the ignition key.
–
Attach the hooks on the passenger seat
the subframe.
Info
Ensure that the seat heating cable is correctly routed.
–
Lower the front of the passenger seat and push it toward the
rear at the same time.
–
2
Position locking pin in the lock housing and press the pas-
senger seat forward until the locking pin engages with an audi-
ble click.
1
to the hanger on