Msr (Optional); Applying The Brakes - KTM 1290 Super Adventure S Owner's Manual

10.7

MSR (optional)

10.8

Applying the brakes

Warning
Danger of accidents Moisture and dirt impair the brake system.
–
Brake carefully several times to dry out and remove dirt from the brake linings and the brake discs.
Warning
Danger of accidents A spongy pressure point on the front or rear brake reduces braking efficiency.
–
Check the brake system and do not continue riding until the problem is eliminated. (Your authorized
KTM workshop will be glad to help.)
The MSR is an optional auxiliary function of the engine control.
If the engine braking effect is too great, the MSR prevents the rear
wheel from locking or sliding away on a sloping position.
To avoid slip of the rear wheel, the MSR only opens the throttle
valve as far as absolutely necessary.
The MSR is applied on surfaces, where the friction is to low to
open the slipper clutch.
To further increase ride safety, the MSR is slope dependent.
Info
402423-01
If ABS is disabled, MTC is disabled or ABS Mode Offroad is
enabled, the MSR is not active.
RIDING INSTRUCTIONS 10
163