KTM 1290 Super Adventure S Owner's Manual page 235

–
Position brake calipers.
The brake linings are correctly positioned.
–
Mount screws
yet.
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point. Secure the hand brake lever in the activated position.
The brake calipers straighten.
–
V00768-11
Tighten screws
Guideline
Screw, front
brake caliper
–
Remove locking piece of the hand brake lever.
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Remove the vehicle from the center stand. (
V00767-11
5
on both brake calipers, but do not tighten
5
on both brake calipers.
M10 45 Nm (33.2 lbf ft)
6
in the hole.
7
.
M6 10 Nm (7.4 lbf ft)
WHEELS, TIRES 15
Loctite ® 243™
p. 179)
233