Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
–
Tighten nut
Guideline
Nut, rear wheel
spindle
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
V00772-12
5
.
M25x1.5
90 Nm (66.4 lbf ft)
6
in the hole.
7
.
M6
WHEELS, TIRES 15
B
.
Thread greased
10 Nm (7.4 lbf ft)
239