KTM 1290 Super Adventure S Owner's Manual page 132

8 ERGONOMICS
130
–
Remove screws
the handlebar and lay it to one side.
Info
Cover the components to protect them against damage.
Do not bend the cables and lines.
–
Remove screws
–
Place the handlebar supports in the required position. Mount
308080-01
and tighten screws
Guideline
Screw, handle-
bar support
Info
Position the left and right handlebar supports evenly.
1
. Remove the handlebar clamps. Remove
2
. Take off the handlebar supports.
2
.
M10 40 Nm (29.5 lbf ft)
Loctite ® 243™