Taiwan Commate Computer Inc. S630MA Quick Installation page 27

3.12 Set Password
You can assign, modify, or cancel password settings. To modify, highlight "Set Password" and press the <Enter> key.
The screen will prompt you (
characters. System will prompt you to reenter the password to verify. Remember the passwords are case sensitive.
If you want to remove the passwords, either delete passwords or press <Enter> when prompting for new password.
If you want it to require password upon initial system startup and upon entering the CMOS Setup Utility, you will need
to change the selection of the (Security Option) under (Advanced BIOS Features ) to "System".
If the setting is "Setup", the system will only require the password you activate CMOS Setup Utility.
3.13 Save & Exit Setup
When all the changes have been made, highlight "Save & Exit Setup" and press <Enter>. The message below will
appear:
Save to CMOS and Exit (Y/N)? N
Type "Y" and press <Enter>. The modifications you have made will be written into the CMOS memory, and the system
will reboot.
3.14 Exit Without Saving
When you do not want to save the changes you have made, highlight "Exit Without Saving" and press <Enter>, The
message below will appear:
Quit Without Saving (Y/N)? N
Type "Y" and press <Enter>. The system will reboot.
Chapter 4. Software installation
4.1 Installing the Sound Driver
4.1.1 Windows 95/98
1. Start up Windows 95 or Windows 98.
[ If your Windows 95 is older version, please install the USB supplement service pack ( usbsupp.exe ) files first.
You can get this file from
2. Insert the CD Driver into the CD drive-enter the \S630MA\SOUND directory on the CD-ROM and double-click
SETUP.EXE
3. Follow the prompts to complete the installation.
4. You must restart your computer for the installation to complete.
5. If Insert Disk dialog is displayed, please insert the Windows 95 or 98 CD-ROM into the CD drive, then click "
OK " button.
6. You must restart your computer again to take the new setting effect.
4.1.2 Windows 2000/NT 4.0 Installation
1. Insert the CD Driver into the CD drive-enter the \S630MA\SOUND directory on the CD-ROM and double-click
SETUP.EXE
2. Follow the prompts to complete the installation.
3. You must restart your computer for the installation to complete.
" "
Enter Password: ). Enter your password. The maximum size of the password is 8
http://www.microsoft.com ]