Table of Contents
Advertisement
2.4.14 Line Out Connector
The Line Out phonejack provides the audio outputs for the left and right stereo channels.
2.4.15 Line In Connector
The Line In phonejack is used to attach monaural or stereo devices such as a cassette, Digital Audio Tape, or
Minidisc players for playback, mixing, or recording.
2.4.16 Microphone In Connector
The Microphone In phonejack is used to attach a monaural microphone for live audio input for playback, mixing, or
recording.
2.4.17 Game/MIDI Port
The Game/MIDI Port connector is used to attach a joystick for game interaction or to attach an external MIDI
device for playback, mixing, or recording.
2.4.18 ATAPI IDE/Sony CD-ROM Audio (4-pin SONY)
The ATAPI IDE/Sony CD-ROM Audio connector is used to connect the audio cable from either an ATAPI IDE or
Sony CD-ROM drive for playback, mixing, and recording.
2.4.19 Panel Connection (24-pin JFRNT)
WARNING: To avoid the system from failing, turn off the power before connecting any
Chapter 3. BIOS Setup
3.1 CMOS Setup Utility
To activate CMOS Setup, press <DEL> key immediately after you turn on the system. The following message
DEL to enter SETUP
When you enter the CMOS Setup Utility, the Main Menu will be displayed (Figure 3-1). You can use arrow keys to
select your function, press <Enter> key to accept the selection and enter the sub-menu.
devices to the system.
"
should appear in the lower left hand corner of your screen.
Figure 3-1. CMOS Setup Utility Main Screen
CMOS Setup Utility - Copyright ( C ) 1984 - 2000 Award Software
"
Press
Advertisement
Table of Contents
