Taiwan Commate Computer Inc. S630MA Quick Installation page 15

Virus Warning
CPU Internal Cache
External Cache
CPU L2 Cache ECC Checking
Processor Number Feature
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
X Typematic Rate (Chars/Sec)
X Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
HDD S.M.A.R.T. Capability
Report No FDD For WIN 95
Video BIOS Shadow
3.3.1 Virus Warning
When enabled, the BIOS will monitor the boot sector and the partition table on the hard drive for any
attempt to modify. If an attempt is detected, the BIOS will halt the system and prompt the warning message.
Select "Disabled" if you are installing a new operating system.
3.3.2 CPU Internal/External Cache
These options are to enable or disable CPU Internal (L1) Cache, or External (L2) Cache.
3.3.3 CPU L2 Cache ECC Checking
Select "Enabled" to enable CPU L2 Cache ECC Checking.
Select "Disabled" to disable CPU L2 Cache ECC Checking.
3.3.4 Processor Number Feature
This field will appear only when you are using a Pentium III processor. Each Pentium III processor comes
with an individual "processor serial number" which by default is activated. Therefore, when connected to
the internet, Pentium III processor transmits the serial number online making it possible to track your online
activity. The field provides you the option of disabling this function.
3.3.5 Quick Power On Self Test
Select "Enabled" to speed up time required to complete Power-On Self-Test.
3.3.6 First/Second/Third Boot Device & Boot Other Device
This option allows user to assign boot sequence of the system. Available options are Floppy, HDD, CD-
ROM, SCSI, LAN and LS120/ZIP. Set " Boot Other Device" to Enabled if you wish to boot from another
Figure 3-3. Advanced BIOS Features Screen
CMOS Setup Utility - Copyright ( C ) 1984 - 2000 Award Software
Advanced BIOS Features
¯ ® ¬: Move
Enter : Select
F5 : Previous Value
( Scroll down to see more items , as shown here )
Disabled
Enabled
Enabled
Enabled
Disabled
Enabled
IDE-0
Floppy
SCSI
Disabled
Disabled
Disabled
On
Fast
Disabled
6
250
Setup
Non-OS2
Disabled
Yes
Enabled
+/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F6 : Fail-Safe Defaults F7 : Optimized Defaults
Item Help
Menu Level >