Table of Contents
Advertisement
This field is used to select the midi port's IRQ.
3.5.21 USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller.
3.5.22 USB Keyboard Support
This item lets you enable or disable the USB keyboard driver within the onboard BIOS.
3.5.23 IDE HDD Block Mode
This feature enhances disk performance by allowing multi-sector data transfers and eliminates the interrupt
handling time for each sector.
3.5.24 Init Display First
Select "AGP" or "PCI Slot" for system to detect first when boot-up.
3.5.25 System Share Memory Size
This item defines the amount of system memory that will be shared and uses as video memory.
3.6 Power Management Setup
Power management decreases power usage under the pre-defined standby time range.
ACPI function
ACPI Suspend Type
Video Off Option
Video Off Method
Switch Function
MODEM Use IRQ
Power Button Override
> PM Wake Up Events
3.6.1 ACPI Function
This item allows you to enable or disable the function of Advanced Configuration and Power Interface which offers
improved power management .
3.6.2 ACPI Suspend Type
This field is used to select the type of Suspend function.
S1 (POS): Enables the Power On Suspend function.
Figure 3-6. Power Management Setup Screen
CMOS Setup Utility - Copyright ( C ) 1984 - 2000 Award Software
Power Management Setup
¯ ® ¬: Move
Enter : Select
F5 : Previous Value
Enabled
S1 (POS)
Susp, Stby -> off
V/H SYNC+Blank
Break/Wake
3
Instant Off
Press Enter
+/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F6 : Fail-Safe Defaults
F7 : Optimized Defaults
Item Help
Menu Level >
Advertisement
Table of Contents
