Kia Carnival 2023 Owner's Manual page 395

Driving your vehicle
Navigation-based Smart Cruise
Control operating
OKA4050540N
If temporary deceleration is required in
the standby state and Navigation-based
Smart Cruise Control is operating, the
green ( ) symbol will appear on the
cluster.
If the Highway Set Speed Auto Change
function operates, the green (
symbol and set speed will appear on the
cluster, and an audible warning will
sound.
WARNING
'Drive carefully' warning message will
appear in the following circumstances:
OKA4050123L
5 120
Navigation-based Smart Cruise Control (NSCC)
僅 Navigation-based Smart Cruise Con-
trol is not able to slow down your
vehicle to a safe speed
NOTICE
Highway Curve Zone Auto Slowdown
and Set Speed Auto Change function
uses the same (
Highway Curve Zone Auto Slow-
down
僅 Depending on the curve ahead on the
highway (or motorway), the vehicle
will decelerate, and after passing the
curve, the vehicle will accelerate to
Smart Cruise Control set speed.
僅 Vehicle deceleration time may differ
depending on the vehicle speed and
the degree of the curve on the road.
)
The higher the driving speed, deceler-
ation will start faster.
Highway Set Speed Auto Change
僅 Highway Set Speed Auto Change
function will operate when Smart
Cruise Control set speed and the
highway (or motorway) speed limit is
matched.
僅 While Highway Set Speed Auto
Change function is operating, when
the highway (or motorway), speed
limit changes, Smart Cruise Control
set speed automatically changes to
the changed speed limit.
僅 If Smart Cruise Control set speed is
adjusted different from the speed
limit, Highway Set Speed Auto
Change function will be in the standby
state.
僅 If Highway Set Speed Auto Change
function has changed to the standby
) symbol.