Kia Carnival 2023 Owner's Manual page 176

Features of your vehicle
The outside rear view mirrors will auto-
matically revert to their original positions
if any of the followings occur:
僅 The ignition switch or ENGINE START/
STOP button is placed to either the
LOCK/OFF position or the ACC posi-
tion.
僅 The gear is shifted to any position
except R (Reverse).
僅 The remote control outside rear view
mirror switch is not selected.
Auto reverse user settings
If you cannot secure enough visibility
with the angles provided as factory
default conditions, you can readjust and
store the angles of outside rear view mir-
rors.
The factory default angles of the right
and left rear view mirrors might be set
differently to improve visibility.
1. Set the shift lever to P (Parking). Make
sure that the vehicle is stopped and
the mirrors are not working.
2. Position the lever to L (left) or R (right)
depending on the mirror that you
want to adjust.
3. Step on the brake pedal and shift the
shift lever to R (Reverse).
4. When the downward movement of
the rear view mirror is finished, adjust
the mirror to the desired angle by
pressing the switches, ▼, ▲, ◀, ▶.
5. If you shift the shift lever to a position
other than R (Reverse), or change the
rear view mirror selector lever to the
neutral position, and the automatic
return of the mirror is finished, the
adjusted angle will be automatically
saved.
6. You can adjust the rear view mirror on
the other side by following the same
procedures (1-5).
How to reset auto reverse user
settings
If you want to change the automatic
control function of rear view mirrors to
factory-default conditions, follow the
steps below.
1. Shift the shift lever to P (Park). Make
sure that the vehicle is stopped and
the mirror is not working.
2. Choose the mirror to be adjusted by
positioning the lever to L (left) or R
(right).
3. Step on the brake pedal and shift the
shift lever to R (Reverse).
4. When the downward movement of
the rear view mirror is finished, press
the switch ▲ to locate the mirror in
the position higher than before (P, N
or D).
(Adjust the mirror in the higher posi-
tion compared to its position in the
driving mode)
5. It is initialized when the shift lever is
shifted to a position other than R
(Reverse), or the rear view mirror
selector lever is changed to the neu-
tral position. (Initialized position will be
applied from next operation)
6. You can initialize settings for the mir-
ror on the other side by following the
same procedures (1-5).
CAUTION
We recommend following the proce-
dures in an orderly manner to change or
initialize the auto reversing user settings.
If you move to the next step before com-
pleting the previous one, the changed
angle may not be changed or initializa-
tion may not work properly.
Mirrors
4
4 81