Kia Carnival 2023 Owner's Manual page 170

Features of your vehicle
mission, which may not be long enough
for HomeLink to pick up the signal
during programming.
If you live in Canada or you are having
difficulties programming a gate operator
or garage door opener by using the pro-
gramming procedures, replace "Pro-
gramming a New HomeLink Button"
step 3 with the following:
While the HomeLink indicator light (7) is
flashing orange, press and release
("cycle") your device's hand-held remote
every two seconds until the HomeLink
indicator light (7) changes from orange
to green. You may now release the
hand-held remote button. Then proceed
with "Programming a New HomeLink
Button" step 4.
2. Operating HomeLink씾
1) Operating HomeLink씾
1. Press and release the desired pro-
grammed HomeLink button (1, 2 or 3).
OKA4040541N
NOTICE
The HomeLink indicator (7) should light
green, solid or flashing, and your pro-
grammed device should operate.
If your device does not operate, the
HomeLink programming was not suc-
cessful, and you'll need to reprogram the
button.
2) Two-Way Communication Dis-
play Behavior
1. Press and release one of the pro-
grammed HomeLink buttons (1, 2 or
3)
OKA4040543N
2. The indicator (4) and (6) operates as
below, if your garage door opener has
Two-Way Communication functional-
ity.
OKA4040544N
僅 If the indicator (4) flashes in
Orange, it indicates that the garage
door is "Closing".
僅 The indicator (4) turns solid green
once the garage door has closed.
Mirrors
4
4 75