Kia Carnival 2023 Owner's Manual page 167

Features of your vehicle
僅 Visit the HomeLink website at:
www.homelink.com. Then at the top
of the page, choose your vehicle
make. Then watch the You Tube
video, and/or access additional web-
site information.
僅 If you choose to access the website
via your cell phone, scan the QR code.
僅 Or, call HomeLink customer support
at 1-800-355-3515
(Please have the vehicle make/model
AND the opener device make/model
readily available.)
1) Programming Preparation
1. When programming a garage door
opener, it is advised to park the vehi-
cle outside of the garage.
2. It is recommended that a new battery
be placed in the hand-held transmit-
ter of the device being programmed
to HomeLink for quicker training and
accurate transmission of the radio-
frequency signal.
3. Place the ignition switch or ENGINE
START/STOP button to the ACC
(Accessory) position for program-
ming of HomeLink.
4 72
OKA4040535N
2) Programming a New Home-
Link씾 Button
1. Press and release the HomeLink but-
ton (1), (2) or (3), you would like to
program. The HomeLink indicator
light (7) will flash orange slowly (if not,
perform the steps of "Erasing Home-
Link Buttons" section, and start over).
OKA4040541N
2. Position the garage door opener
remote 1 - 3 inches (2 - 8 cm) away
from the HomeLink buttons.
Mirrors