Husqvarna R 418TsX AWD Operator's Manual page 98

5. Indicator for cutting deck presence
6. PTO indicator
7. Tachometer
8. Recommended engine RPM when you operate the
product.
9. Parking brake indicator
10. Operator presence control (OPC)
11. Fuel gauge
12. Work light or high beam light indicator
®
13. Bluetooth
14. Weight transfer disengaged
15. Service indicator
16. Fuel gauge measured in steps of 5%
17. Low fuel level indicator
18. Total run time
19. Digital lock
20. Operation run time
Note:
The look of the display can be different between
different models.
Symbols on the product
WARNING: Be careful and use the
product correctly. This product can cause
serious injury or death to the operator or
others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Rotating blades. Keep body parts away.
Warning: rotating parts. Keep body parts
away.
Look out for ejecting objects and
ricochets.
Never use the product if persons,
especially children, or animals, are in the
vicinity.
Look behind you before and while you
move the product in reverse.
98
Never cut grass across a slope. Do not
cut grass on ground that slopes more than
To cut grass on slopes on
10°. Refer to
page 102 .
Never carry passengers on the product or
equipment.
Move forward.
Neutral gear.
Move rearward.
Parking brake.
This product is in accordance with
applicable EC directives.
This product conforms to the applicable
UK regulations.
Noise emission to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". The guaranteed sound power level
of the product is specified in
data on page 129 and on the label.
Always use approved hearing protection.
Weight transfer disengaged.
Weight transfer engaged.
Stop the engine.
Start the engine.
880 - 009 - 31.10.2022
Technical