Husqvarna R 418TsX AWD Operator's Manual page 107

To apply and release the parking brake
1. Push the parking brake pedal down (A).
2. Push and hold the lock button (B).
A
3. Keep the lock button pushed and release the parking
brake pedal.
4. To release the parking brake, push the parking brake
pedal.
To engage and disengage the drive
system
To move the product with the engine off, the drive
system must be disengaged. Pull out the drive system
lever fully to disengage the drive on the axle. Push the
drive system lever in fully to engage the drive on the
axle. Do not use middle positions.
The product has one drive system lever for the front axle
and one for the rear axle. The drive system lever for the
rear axle is found behind the left rear wheel.
880 - 009 - 31.10.2022
B
The drive system lever for the front axle is found behind
the left front wheel.
To lift and lower the cutting deck
• To lift the cutting deck to the transport position, pull
the lift lever rearward.
• To lower the cutting deck to the mow position, push
the lift lever forward.
To start the engine
1. Push the PTO button to disengage the drive on the
cutting deck.
2. Apply the parking brake. Refer to
release the parking brake on page 107 .
To apply and
107