Lexus RCF 2022 Owner's Manual page 83

Navigation system-linked dis-
play (if equipped)
Select to display the following naviga-
tion system-linked information.
 Route guidance to destination
 Compass display (heading-up dis-
play)
Audio system-linked display
Select to enable selection of an audio
source or track on the meter using the
meter control switches.
Driving support system informa-
tion display
Select to display the operational status
of the following systems:
 Dynamic radar cruise control
(P.171)
 LDA (Lane Departure Alert with
steering control) (P.164)
Warning message display
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (P.308)
Settings display
Meter display settings that can be
■
changed
 Language
Select to change the language on the dis-
play.
2-1. Instrument cluster
 Units
Select to change the units of measure dis-
played.
Eco Driving Indicator Light

(P.76)
Select to enable/disable the Eco Driving
Indicator Light.
 Switch settings
Displays a procedure to register a desired
screen to .
You can register 1 screen as a shortcut,
which can be displayed by pressing
 Drive information screen (P.75)
Select to select up to 2 items that will be
displayed on each Drive information
screen (Drive information 1 screen, Drive
information 2 screen, and Drive informa-
tion 3 screen) respectively.
 Pop-up display (P.72)
Select to enable/disable the pop-up dis-
play.
• Intersection Guidance (if equipped)
• Telephone
• Audio Feedback
• Volume Feedback
• Adjust Brightness
• TVD MODE (if equipped)
 Rev indicator (P.70)
• Select to enable/disable the Rev indica-
tor.
• Select to set the desired engine speed at
which the Rev indicator will begin to be
displayed.
 Rev peak (P.71)
Select to enable/disable the Rev peak.
81
2
.