Lexus RCF 2022 Owner's Manual page 77

SYSTEM OWNER'S MANUAL".
Registering a top screen
■
The displayed top screen can be
changed to a registered screen of your
choice.
To register a screen as the top screen,
display the desired screen and press
and hold .
 A message asking to confirm if reg-
istration is desired will be displayed.
If the selected screen cannot be
registered, a registration failure
message will be displayed.
 When no screen has been regis-
tered, the drive information screen
will be displayed.
Resetting drive information
■
To reset the average fuel economy
(after reset)/average vehicle speed
(after reset)/elapsed time (after reset)
that are displayed on
desired item and press and hold
If both of the displayed items are resetta-
ble, a message will be displayed asking
which item(s) to reset.
Content displayed as drive infor-
mation
Drive information 1/Drive infor-
■
mation 2/Drive information 3
Select to display various drive data.
Up to 2 of the following items can be
selected for each drive information
screen:
Items displayed can be switched by
pressing
trol switches to select
Use the displayed values as a reference
only.
 Drive information 1
• Current fuel consumption
• Average fuel economy (after reset)
 Drive information 2
• Distance (driving range)
• Average vehicle speed (after reset)
 Drive information 3
• Average fuel economy (after refuel)
• Elapsed time (after start)
Displayed items (listed below) can be
changed on
 Current fuel consumption
Displays instantaneous current fuel con-
sumption
, display the
 Average fuel economy
.
• After reset: Displays average fuel con-
• After start: Displays average fuel con-
• After refuel: Displays average fuel con-
 Average vehicle speed
• After reset: Displays average vehicle
• After start: Displays average vehicle
 Elapsed time
• After reset: Displays elapsed time since
2-1. Instrument cluster
or of the meter con-
or .
. (P.81)
sumption since display reset
sumption since engine start
sumption since refuel
speed since display reset
speed since engine start
the display was reset
75
and pressing
*1, 2
*2
*2, 3
*1
*1
2