Lexus RCF 2022 Owner's Manual page 234

232
5-5. Using the other interior features
vehicle) for 2 seconds and release
it. Repeat this sequence
(press/hold/release) up to 3 times
to complete programming.
If the garage door opener motor
operates when the HomeLink
button is pressed, the garage door
opener motor recognizes the
®
HomeLink signal.
Enabling 2-way communication
■
with a garage door (only available
for compatible devices)
When enabled, 2-way communication
allows you to check the status of the
opening and closing of a garage door
through indicators in your vehicle.
2-way communication is only available
if the garage door opener motor used
is a compatible device. (To check
device compatibility, refer to
www.homelink.com.)
1
Within 5 seconds after program-
ming the garage door opener has
been completed, if the garage door
opener motor is trained to
®
HomeLink , both garage door
operation indicators will flash rap-
idly (green) and the light on the
garage door opener motor will
blink twice, indicating that 2-way
communication is enabled.
If the indicators do not flash, perform
3
within the first 10 presses of the
HomeLink
has been completed.
®
2
Press a programmed HomeLink
button to operate a garage door.
3
Within 1 minute of pressing the
HomeLink
garage door operation has
stopped, press the "Learn" or
"Smart" button on the garage door
opener motor. Within 5 seconds of
the establishment of 2-way com-
munication with the garage door
opener, both garage door opera-
tion indicators in the vehicle will
flash rapidly (green) and the light
on the garage door opener motor
will blink twice, indicating that
2-way communication is enabled.
Reprogramming a single
■
HomeLink
When the following procedure is per-
formed, buttons which already have
devices registered to them can be
overwritten:
1
With one hand, press and hold the
desired HomeLink
2
When the HomeLink
starts flashing (orange), continue to
hold the HomeLink
perform "Programming
HomeLink
for the HomeLink
start flashing).
®
button after programming
®
button, after the
®
button
®
button.
®
indicator
®
button and
®
" 1(it takes 20 seconds
®
indicator to
2
and
®