Table of Contents
Advertisement
Large adjustment: Increases or decreases
*1
in 1 mph (1.6 km/h)
increments for as long as the lever is held
For Canada, Guam and Puerto
■
Rico
Fine adjustment: By 1 mph (1.6 km/h)
*2
km/h (0.6 mph)
each time the lever is
operated
Large adjustment: Increases or decreases
*1
in 5 mph (8 km/h)
or 5 km/h (3.1 mph)
increments for as long as the lever is held
In the constant speed control mode
(P.176), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
*2
1.6 km/h (1 mph)
each time the lever is
operated
Large adjustment: The speed will continue
to change while the lever is held.
*1
: When the set speed is shown in "MPH"
*2
: When the set speed is shown in "km/h"
Changing the vehicle-to-vehicle
distance (vehicle-to-vehicle dis-
tance control mode)
Pressing the switch changes the vehi-
cle-to-vehicle distance as follows:
1
Long
4-5. Using the driving support systems
*2
or 1 km/h (0.6 mph)
*1
or 1
*2
*1
or
2
Medium
3
Short
The vehicle-to-vehicle distance is set auto-
matically to long mode when the engine
switch is turned to IGNITION ON mode.
If a vehicle is running ahead of you, the pre-
ceding vehicle mark
played.
Vehicle-to-vehicle distance set-
tings (vehicle-to-vehicle dis-
tance control mode)
Select a distance from the table below.
Note that the distances shown corre-
spond to a vehicle speed of 50 mph
(80 km/h). Vehicle-to-vehicle distance
increases/decreases in accordance
with vehicle speed.
Distance
Vehicle-to-vehicle dis-
options
Approximately 160 ft. (50
Long
m)
Approximately 130 ft. (40
Medium
m)
Approximately 100 ft. (30
Short
m)
175
will also be dis-
A
tance
4
Advertisement
Table of Contents
