Table of Contents
Advertisement
injected.
10
Check the specified tire inflation
pressure.
Tire inflation pressure is specified on the
label as shown. (P.345)
11
Start the engine. (P.128)
7-2. Steps to take in an emergency
12
To inject the sealant and inflate the
tire, turn the compressor switch on.
13
Inflate the tire until the recom-
mended pressure is reached.
The sealant will be injected and the
A
pressure will spike to 44 psi (300
kPa, 3.0 kgf/cm
(400 kPa, 4.0 kgf/cm
gradually decrease.
The air pressure gauge will display
B
the actual tire inflation pressure
about 1 minute (15 minutes at low
temperature) after the switch is
turned on.
317
2
or bar) or 58 psi
2
or bar), then
7
Advertisement
Table of Contents
