Table of Contents
Advertisement
3
Remove the engine cover.
Raise the rear of the engine cover
to remove the rear clip, and then
4
Connect a positive jumper cable clamp to
clamp on the other end of the positive cable to
connect a negative cable clamp to
clamp at the other end of the negative cable to
Positive (+) battery terminal (your vehicle)
A
Positive (+) battery terminal (second vehicle)
B
Negative (-) battery terminal (second vehicle)
C
Solid, stationary, unpainted metallic point away from the battery and any mov-
D
ing parts as shown in the illustration
7-2. Steps to take in an emergency
raise the front of the engine cover
to remove the front clips.
on your vehicle and connect the
A
on the second vehicle. Then,
B
on the second vehicle and connect the
C
.
D
333
7
Advertisement
Table of Contents
