Resetting The Current Picture Mode; Adjusting Audio Settings - BenQ Home Series User Manual
Hide thumbs
Also See for Home Series:
- User manual (75 pages) ,
- User manual (72 pages) ,
- User manual (56 pages)
Table of Contents
Advertisement
Customizing a picture mode
1. Go to Picture > Picture Mode.
2. Press
/
to select User.
3. Press
to highlight User Mode Management, and press OK. The User Mode Management page is displayed.
4. Select Load Settings From to select a preset mode to modify the settings, and press OK.
5. Press / to select a Picture Mode that is closest to your need.
6. Press OK and BACK to return to the Picture menu.
7. Press
to select the Picture menu items you want to change and adjust the values with
mode.
Renaming a customized picture mode
Select to rename the customized picture mode (User). The new name can be up to 9 characters including English letters (A-Z, a-z), digits (0-9),
and space (_).
1. Go to Picture > Picture Mode.
2. Press
/
to select
User.
3. Press
to highlight User Mode Management, and press OK. The User Mode Management page is displayed.
4. Press
to highlight Rename User Mode and press OK. The Rename User Mode page is displayed.
5. Use
/
/
/ , and OK to set desired characters.
6. When done, press BACK to save the changes and exit.
Resetting the current picture mode
Returns all of the adjustments you've made for the selected Picture Mode to the factory preset values.
1. Go to Picture > Reset Current Picture Mode > Reset.
2. Press OK. The confirmation message is displayed.
3. Use
/
to select Reset and press OK. The current Picture Mode returns to the factory preset settings.
Adjusting audio settings
In general, you can select a sound mode from Audio > Sound Mode to suit your scenario. As Cinema is recommended for movie watching,
more options are provided to enhance your cinematic experience. See
• If the projector is used for side projection and is not aligned centerly with you and the screen in the room, you might want to balance the
left/right channels of the speakers depending on the location of your projector. Go to Audio > Left / Right Channel Settings. See
the left and right channels of the speakers (for side projection)" on page 39
• To meet your listening preferences, adjust the frequency band of the built-in speakers separately from User Sound EQ.
• If external speakers are preferred, connect the speakers first. Go to Audio > Audio Outputs to change the settings. Select an appropriate
/
. The adjustments define the selected User
"Sound mode" on page 39
for more information.
for more information.
38
"Adjusting
Advertisement
Table of Contents
