Connecting A Speaker With Arc; Connecting A Usb Flash Drive - BenQ Home Series User Manual

2. Confirm whether you want to project video from the device. The video from the device will be displayed once the signal from the device is
detected.
If no signal is detected or the signal is interrupted a message will appear.
3. Use the source menu or press the home button
4. If the device remains connected and you want to project its video again press the source button
in the source menu.
• Some computers feature HDMI ports that do not transmit audio, in such cases a separate audio cable must be connected to the projector.
• Some laptops do not turn on their external video ports when connected to a projector. Usually a key combination like Fn + F3 or CRT/LCD key turns the external
display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the laptop. Press Fn and the labeled function key simultane-
ously. Refer to your laptop's documentation to discover your laptop's key combination.

Connecting a speaker with ARC

The HDMI-2 port on the projector features Audio Return Channel (ARC) capabilities which allows it to output its audio to an ARC-compatible
speaker connected via an HDMI cable.
1. Connect input source to the HDMI-1 port of the projector.
2. Connect the ARC-compatible speakers to the HDMI-2 port of the projector. Disconnect other external speakers if possible.
3. Go to Audio > Audio Outputs. Select Audio Return. The audio input from HDMI-1 will be output to the ARC-compatible external speakers via
HDMI-2.

Connecting a USB flash drive

Connect a USB-A drive to the respective port on the projector to play media files stored on the flash drive.
1. Connect the flash drive to the USB-A.
2. Confirm whether you want to play media files from the device.
3. Select the storage device where the media files are located.
4. Select the type of media file you want to play to view files located on the device.
5. Navigate to and select the media file you want play. The projector's media player will launch.
to exit and go back to the Android TV home screen.
49
, and then select the corresponding port