Ending The Bluetooth Connection; Pairing/Connecting To A Bluetooth Speaker Or Headphones - BenQ Home Series User Manual

1. Make sure the ATV dongle is installed properly (see
2. Power on the projector (see
3. Press the Bluetooth button
mode.
4. Pair your mobile device to the projector.
After you have successfully paired your mobile device with the projector, pairing information will be stored on both devices and a connection
will automatically be made when Bluetooth is enabled on both devices and both devices are within range of each other.
• You may also enable Bluetooth speaker mode by pressing the source button on the remote control and selecting Bluetooth Speaker Mode.
• If you are unable to activate Bluetooth mode or if the Bluetooth LED does not illuminate, shut off the projector and check to see if the ATV dongle is properly in-
stalled. See "Installing the ATV dongle" on page 25

Ending the Bluetooth connection

In cases where you want to disconnect the mobile device from the projector, either:
• Disconnect from the projector in the Bluetooth menu of your mobile device.
• Press the Bluetooth button
• Press and hold the power button

Pairing/Connecting to a Bluetooth speaker or headphones

The Bluetooth function for your projector is built in the Android system, whose hardware is independent of other input sources like HDMI.
Thus,the Bluetooth function will only be available when using the projector's built-in Android as an input source. In other words, due to
current hardware limitations, the projector won't be able to transmit audio using HDMI to external Bluetooth speakers. If you have any further
questions, please contact your local customer care team for more assistance.
1. Make sure the ATV dongle is installed properly (see
2. Power on the projector (see
3. Press the settings button
4. Select Remotes & Accessories.
5. Select Add Accessories.
6. Activate Bluetooth-pairing mode on the speaker or headphones.
7. Select the speaker or headphones from the device list shown on screen.
8. Select Pair.
When the projector and speaker or headphones have successfully connected, the device will be labelled as Connected in the
Remotes & Accessories. You can now output the audio from the ATV to the speaker or headphone.
"Installing the ATV dongle" on page
"Starting up the projector" on page
on the top side of the projector. The projector will stop projecting and switch over to Bluetooth speaker
for details.
on the projector to return the projector to projector mode.
on the projector or remote control to power off the projector.
"Installing the ATV dongle" on page
"Starting up the projector" on page
on the remote control
25).
26).
25).
26).
51