Resetting The Picture Mode - BenQ W7000 User Manual

Setting the User 1/User 2/User 3 mode
There are three user-definable modes if the current available picture modes are not suitable for your
need. You can use one of the picture modes (except the selected User mode) as a starting point and
customize the settings.
1. In the Picture -- Basic menu, highlight Preset Mode and press
to select User 1, User 2, or User 3 mode.
2. Press to highlight Load Settings From.
This function is only available when User 1, User 2, or User 3
mode is selected up in the Preset Mode sub-menu item.
3. Press ENTER to display the Load Settings From page.
4. Press to highlight a picture mode that is closest to your need and
press ENTER and EXIT.
5. Press to select a sub-menu item to be changed and adjust the value
with / . See "Fine-tuning the picture quality" on page 28
"Advanced picture quality controls" on page 29
6. When all settings have been done, press MENU to save and leave
the settings.

Resetting the picture mode

All of the adjustments you've done in the Picture -- Basic and Picture -- Advanced menus can be
returned to the factory preset values with a key press on the highlight of Reset.
To reset the picture mode to the preset factory values:
1. In the Picture -- Basic menu, highlight Preset Mode and press
(including User 1, User 2, or User 3) you want to reset.
2. Press to highlight Reset Picture Settings and press ENTER. The confirmation message displays.
3. Press / to highlight Reset and press ENTER. The picture mode will return to the factory
preset settings.
4. Repeat steps 1-3 if you want to reset other picture modes.
Do not to be confused with the Reset Picture Settings function here with the Reset All Settings in the
Advanced Setup menu. The Reset All Settings function returns most of the settings to the factory preset
values system wide. See "Reset All Settings" on page 43
/
and
for details.
/
for details.
Connecting with video equipment
Picture -- Basic
Preset Mode User 1
Load Settings From
ENTER
Brightness 50
Contrast
50
Color
50
0
Tint
Sharpness 3
Flesh Tone 3
Reset Picture Settings
S-Video
Load Settings From
ISF Night ENTER
ISF Day
Cinema
Dynamic
Standard
User 1
User 2
User 3
to select the picture mode
Back
Back
27