Mounting The Projector; Before Mounting The Projector - BenQ Home Series User Manual

For example, if you are using a 120-inch screen, the recommended projection distance is 2660-3460 mm.
If your measured projection distance is 288 cm, the biggest projected screen size is 130-inch, the smallest projected screen size is 110-inch.
To optimize your projection quality, we suggest doing the projection by referring to the values listed in the non-gray rows.
All measurements are approximate and may vary from the actual sizes.
BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in
situ before you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting position
so that it best suits your installation location.

Mounting the projector

If you intend to mount your projector, we strongly recommend that you use a proper fitting BenQ projector mounting kit and that you ensure it
is securely and safely installed.
If you use a non-BenQ brand projector mounting kit, there is a safety risk that the projector may fall down due to an improper attachment
through the use of the wrong gauge or length screws.

Before mounting the projector

• Purchase a BenQ projector mounting kit from the place you purchased your BenQ projector.
• BenQ recommends that you also use a security cable to secure both the base of the mounting bracket and the security bar on the projector.
This will perform the secondary role of restraining the projector should its attachment to the mounting bracket become loose.
• Ask your dealer to install the projector for you. Installing the projector on your own may cause it to fall and result in injury.
• Take necessary procedures to prevent the projector from falling off such as during an earthquake.
• The warranty doesn't cover any product damage caused by mounting the projector with a non-BenQ brand projector mounting kit.
• Consider the surrounding temperature where the projector is ceiling mounted. If a heater is used, the temperature around the ceiling may be
higher than expected.
• Read the user manual for the mounting kit about the range of torque. Tightening with torque exceeding the recommended range may cause
damage to the projector and subsequently falling off.
• Make sure the power outlet is at an accessible height so that you can easily shut down the projector.
24