BenQ Home Series User Manual page 9

6. In areas where the mains power supply voltage may fluctuate
by ±10 volts, it is recommended that you connect the projector
through a power stabilizer, surge protector or uninterruptible power
supply (UPS) as appropriate to your situation.
7. Do not step on the projector or place any objects upon it.
8. Do not place liquids near or on the projector. Liquids spilled into
the projector will void your warranty. If the projector does become
wet, disconnect it from the power point and call BenQ to have the
projector repaired.
9. Do not look straight into the projector lens during operation. It may
harm your sight.
10. Do not operate the projector LED beyond the rated LED life.
Excessive operation of LEDs beyond the rated life could cause
LEDs to break on rare occasions.
11. Do not attempt to disassemble this projector. There are dangerous
high voltages inside which may cause death if you should come
into contact with live parts.
Under no circumstances should you ever undo or remove any
other covers. Refer servicing only to suitably qualified professional
service personnel.
• Please keep the original packing for possible future shipment
• If you need to pack your projector after use, adjust the projection lens to
an appropriate position, put the lens cushion around the lens, and fit the
lens cushion and projector cushion together to prevent damage during
transportation.
9