Adjusting The Projected Image; Adjusting The Projection Angle - BenQ Home Series User Manual

Adjusting the projected image

Adjusting the projection angle

The projector adjustment feet allow you to adjust the projection angle.
To adjust the projection angle:
1. Lift the front of the projector and turn the front adjustment feet clockwise. Adjust the appropriate projection height and place the projector
horizontally.
2. To retract the feet, turn the feet counterclockwise while raising the projector, then slowly lower the projector.
If the desktop is not flat, you can use the adjustment feet on the back to adjust the level of the screen.
1. Place the projector horizontally on the screen and adjust the feet according to the actual situation.
2. Turn the adjusting foot clockwise to adjust.
• The maximum angle of adjustment is 8.2 degrees.
• If the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this, see
details.
1
31
8.2°
2
"2D Keystone" on page 33 for