BenQ Home Series User Manual page 27

• When supplying power directly to the projector please use the supplied power cable to avoid possible dangers such as electric shock and fire.
• Prior to pairing the remote control to your projector you must ensure that your remote control is in range of the projector's IR sensor. See
tive range" on page 18 for more details.
• Powering on via the remote control will not work if you have not completed the setup wizard procedure or if the projector's battery level is below 5%.
4. The fans will start operating and a start-up image will be shown while the projector warms up. This process may take a few minutes. The
projector does not respond to further commands while it is warming up.
5. If you are starting up the projector for the first time, the projector's setup wizard will appear to guide you through the initial hardware setup
including selecting the projector's positions the system language and correcting keystone. Using your remote control, follow the on-screen
instructions to proceed with the process.
6. If you are starting up the projector for the first time, upgrade the projector's firmware to the latest version.
3
1
2
27
1 second
or
"Remote control effec-