Operation; Installing The Atv Dongle - BenQ Home Series User Manual

Operation

Installing the ATV dongle

1. Remove the cap from the provided ATV dongle.
2. Place the projector on a flat and stable surface covered by a protective sheet with its top cover facing up.
3. Use an M3 Phillips screwdriver to release 2 screws counterclockwise as illustrated.
4. Remove the top cover from the projector.
2
1
1
5. Connect the power cable to the port on the side of the dongle and then insert the dongle into the ATV dongle port so that the logo side is
facing up.
2
1
25