Table of Contents
Advertisement
Copying Images to Another Card
With two types of cards installed in the camera at the same time, you can copy images
from one card to the other. The copied images are not deleted from the original card
after copying is completed.
Copying all images to another card
You can copy all images from a source card, provided the target card has sufficient space to store
the copied images.
Control panel
2
5
6
152
Displays the mark
for the source card
OFF
ON
3
9
4
7
1
Insert the copy source and target
cards in the camera. (© 24)
2
Check the control panel display
and make sure that the mark for
the source card, SmartMedia
CompactFlash/Microdrive
displayed.
If the mark is not displayed, press and
hold down the SM/CF memory card
button, and then turn the main dial or sub
dial until it is displayed.
3
Set the mode dial to playback
The last picture taken is displayed.
4
Press the menu button
The menu is displayed on the monitor.
5
On the arrow pad, press
to move the green highlight to the
copy mark
6
On the arrow pad, press
move the green highlight to ALL.
7
Press the
COPY? is displayed.
Check the display and make sure that the
source and target selections are correct. If
the selections are reversed, with NO
selected press the
start again from Step 2.
, is
.
or
.
to
button.
button, and then
or
.
Advertisement
Table of Contents
