Table of Contents
Advertisement
With the mode dial set to playback
image, or switch to the index display and display several images at one time in the
monitor.
This feature is convenient
when you want to browse the
pictures stored on the selected
card when you need to find a
particular picture.
16 frames
To return to the shooting mode
• When mode dial is set to playback
You cannot press the shutter button to take a picture in the playback mode. In order to resume
shooting, set the mode dial to P, A, S, or M.
• When mode dial is set to P, A, S, or M.
You can just press the shutter button to take a picture.
Press the monitor button
Cannot enter playback mode?
If the card access lamp is blinking, you cannot enter the playback mode, even after setting the mode
dial to playback
. When the card access lamp goes off, the camera returns to the playback mode.
Monitor blank?
The camera will automatically power itself off if it remains idle for a specified length of time. (© 136)
The camera will switch on automatically after you start to use the camera again.
Limit of the number of playable shot images
The maximum number of playable images is 2,000 even if more than 2,000 images are recorded on
the card.
Caution
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• To avoid damaging the monitor or interfering with the quality of its display, never touch or strike the
surface of the monitor.
, use the main dial or sub dial to enlarge the
1 Frame
Index Display
9 frames
4 frames
.
and wait for the monitor display to go off.
Enlarged Display
Display
This feature is convenient
when you want to confirm that
a picture is correctly in focus.
1 frame
2x
3x
4x
2
45
Advertisement
Table of Contents
