Rtmp - Datavideo iCast 10NDI Instruction Manual

RTMP

In the RTMP mode, the iCast 10NDI can send up to two data streams to multiple CDNs or media
servers that support the Real-Time Messaging Protocol. Examples of the RTMP media server are
USTREAM and Youtube.
Note: The iCast 10NDI does not support RTMP local.
In this section, we will show you how to set up an RTMP stream to Youtube. The step-by-step
account setup is outlined as follows:
1. First, obtain the Server URL and Stream name/key from Youtube.
2. Open the Youtube Live Dashboard
3. On the left column, locate and click "Stream now."
4. On the right, scroll down to the bottom where you will be able to find Server URL and Stream
name/key.
5. On the iCast 10NDI, open the Streaming page.
6. Select a stream engine then the encoder from the Encoder Source drop-down menu. See
Section 5.3 Encoder
7. Select RTMP from the Stream Type drop-down menu.
https://www.youtube.com/live_dashboard
for setup of main and sub encoders.
84