Front Panel - Datavideo iCast 10NDI Instruction Manual

2.2 Front Panel

3
1 2
1 Power button
2 Headphone jack
3 LCD screen / menu browsing knob
4 Input 1 button
5 Channel buttons for program OUT
5
4
6 Multiview layout selection buttons
7 Record button
8 Stream button
9 Hard disk drive slot
1. Power Button
Press the power button to enable the button
functions after you've turned on the power switch
which can be found on the rear panel.
2. Headphone Jack
Headphone jack accepts the mini jack plug of the
stereo headphone type. The headphone volume is
controlled by the Headphone volume adjustment
slider.
3. LCD Screen / Menu Browsing Knob
The OSD menu is shown on the LCD screen. Use the
menu browsing knob to browse the menu and
select a particular option.
4. Input 1 Button
Input source switch button for channel 1 which is
an SDI/HDMI selectable input port. The LED
indicators indicate the currently active port.
15
7
6 8 9