Datavideo iCast 10NDI Instruction Manual page 81

Follow the steps below to obtain the TS URL:
1.
On the web UI, click the "Streaming" tab to open the stream settings page.
2.
Select a stream engine then the encoder from the Encoder Source drop-down menu. See
Section 5.3 Encoder
3.
Select TS from the Stream Type drop-down menu.
4.
Enter the TS URL. Note that the TS URL shown below is only for illustration purpose.
5.
Click the Start Stream button to start the stream and generate the TS play URL shown below.
6.
Enter the TS play URL into the client device to which the video stream is delivered over the TS
protocol.
7.
On the computer, open VLC then click Open Network Stream (shown in the diagram below).
for setup of main and sub encoders.
81