Factory Default; Storage Settings; Format Type; Storage Capacity - Datavideo iCast 10NDI Instruction Manual

FW & FPGA Version
FW Version
FPGA Version
Tap [Left] to Back

Factory Default

After you've selected "Factory Default", you will see the following message prompt on the 2" LCD
screen. Simply push the knob to start the reset or tap the knob left to cancel.

4.2 Storage Settings

If you need to format the inserted hard disk, you can quickly do it from the OSD menu. You can also
view the disk capacity which is displayed in MB.

Format Type

In Format Type, select FAT 32, NTFS or exFAT. Please note that formatting the disk will delete all the
files.

Storage Capacity

The hard disk capacity will be displayed as shown below.
Storage Capacity
0000
MB Remaining
Tap [Left] to Back

4.3 Program CG

The iCast 10NDI allows you to place multiple textual or graphic layer on top of the video. In Program
CG, You can enable/disable these CG layers listed as follows:

Text: textual layer

Graphic: still graphic layer

Logo: still logo layer

Animation: animated graphic layer
See Section 5.6 CG for configuring these CG layers using the Web UI.
0.1.4.6
21.11.3.0
Are you sure you would like to reset
all settings to defaults?
(This action cannot be undone.)
24