Scale; Background Color; Side By Side - Datavideo iCast 10NDI Instruction Manual

Scale

The PGM OUT window can also be scaled by clicking a scale from the "Scale" drop-down menu
below.

Stretch

Fit

Full

Background Color

You may either enter the RGB values or select a color from the color spectrum to set the screen's
background color. Then fine tune the selected color by dragging the circle cursor on the palette.
Click the color wheel button at the bottom right corner to confirm the selection.

Side By Side

The Side By Side layout allows you to see two inputs next
to each other. As shown in the diagram below, there are
two rows of channel buttons in this mode. Click the top
row of channel buttons to change the channel video shown
on the left of the screen and you should see the corresponding channel button showing green on the
front panel. Click the bottom row of channel buttons to change the channel video shown on the
right of the screen and you should see the corresponding channel button showing red on the front
panel. If both sides of the screen display the same channel video, the corresponding channel button
should show red. Buttons of the unselected channel should illuminate white.
R: Red
G: Green
B: Blue
66
H: Hue
S: Saturation
B: Brightness