6. ""DEFAULT VALUES SET": press
The beverage has been reset to the default values. Proceed with
the other beverages or go back to the homepage by pressing
twice.
6.7 Auto-off (standby)
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press "AUTO-OFF";
2. Select the required time interval by pressing the selection
arrows
(increase) or
3. To confirm, press
Auto-off is now programmed.
6.8
Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
Press "ENERGY SAVING" to disable (
function;
The corresponding symbol (B2) appears on the top bar of the
homepage to indicate that the function has been enabled.
Please note:
If energy saving is active, you may have to wait a few seconds
before delivery.
6.9 Coffee temperature
To change the temperature of the water used to make the cof-
fee, proceed as follows:
"COFFEE TEMPERATURE"
1. Press
pear on the display (the current value is underlined);
2. Press the value you want to set (LOW, MEDIUM, HIGH).
Please note:
Varying the temperature has most effect for long beverages.
6.10 Water hardness
For instructions on setting water hardness, see section "15. Set-
ting water hardness".
6.11 Set language
To modify the language of the display, proceed as follows:
"
1. Press
SET LANGUAGE";
2. Press the flag corresponding to the language you want
to set (press
available).
.
(decrease);
.
) or enable (
) the
. The selectable values ap-
to display all the languages
6.12 Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
Press "BEEP" to disable (
6.13 Bluetooth
This function enables or disables the protection PIN to connect
to the appliance from a device.
1. Press "BLUETOOTH". The serial number of the machine (19
digits) and a 4 digit number (PIN) appear on the display (B1);
2. Press (
) to enable or (
the PIN when you connect via the App;
During the connection operations, the PIN required to connect
to the App is displayed.
The PIN can be customised directly from the App.
Please note!
The serial number of the appliance, visible in the "Bluetooth"
function, enables it to be identified unambiguously when an
association is created with the APP.
6.14 Customise profile
To customise the icon of the current profile, proceed as follows:
1. Press "CUSTOMISE PROFILE";
2. Press the required icon (press
the available icons). The top strip on the homepage be-
comes the same colour as the selected icon.
6.15 Default values
This resets all menu settings and user customisation back to
the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press "DEFAULT VALUES": "RESET DEFAULT VALUES"
is displayed. Press
to cancel the operation);
2. "DEFAULT VALUES SET": press
6.16 Statistics
This displays statistics relating to the machine. To view the sta-
tistics, proceed as follows:
Press "STATISTICS" and check all the statistics by scrolling
through the items using
8
) or enable (
) the function;
) to disable the request for
to display all
to confirm (or press
to confirm.
.