18. DISPLAYED MESSAGES
DISPLAYED MESSAGE
FILL TANK WITH FRESH
WATER
INSERT WATER TANK
EMPTY GROUNDS CONTAINER The grounds container (A11) is full.
INSERT GROUNDS CONTAINER After cleaning, the grounds container (A11) has
POSSIBLE CAUSE
Insufficient water in the tank (A17).
The hot water spout (A17) is not inserted or is
inserted incorrectly.
not been replaced.
REMEDY
Fill the tank with water and/or insert it correct-
ly, pushing it as far as it will go until it clicks
into place.
Insert the tank correctly and press as far as it
will go.
Empty the grounds container and drip tray
(A15), clean and put back in the appliance.
Important: when removing the drip tray, the
grounds container must always be emptied,
however little it may have been filled. If this is
not done, it can happen that the grounds con-
tainer will fill up more than expected when fur-
ther coffees are prepared, causing the machine
to clog.
Remove the drip tray (A15) and insert the
grounds container.
21