DeLonghi DINAMICA PLUS ECAM37 95 Series Instructions For Use Manual page 24

DISPLAYED MESSAGE
DESCALING INTERRUPTED
PRESS NEXT TO CONTINUE
TURN MILK FROTH
ADJUSTMENT DIAL TO CLEAN
POSITION
CLEAN
TURN FROTH ADJUSTMENT
DIAL
SELECT A MILDER TASTE
OR REDUCE COFFEE
QUANTITY
DESCALING NEEDED
PRESS OK TO START
(~45MIN)
POSSIBLE CAUSE
Descaling has been interrupted or has not been
completed correctly.
Milk has been delivered recently and the tubes
inside the milk container (E) must be cleaned.
The milk container has been inserted with
the froth adjustment dial (E1) in the CLEAN
position.
Too much coffee has been used.
The machine must be descaled.
REMEDY
Press NEXT to resume descaling. For more in-
formation, see section "14. Descaling".
Turn the froth adjustment dial (E1) to CLEAN
(fig. 18).
Turn the dial to the required froth position.
Select a milder taste by pressing the "AROMA"
button (C6) or reduce the quantity of ground
coffee (maximum 1 measure).
Press the selector corresponding to "OK" to
start descaling or "ESC" to descale later. The
descaling procedure described in section "14.
Descaling " needs to be performed.
24