Table of Contents
Advertisement
After delivering the beverage, the quantity setting is reset to the
value
7.4 Making coffee using pre-ground coffee
Important!
•
Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty
it. This could damage the machine.
•
Never use more than 1 level measure (D2) as it could soil
the inside of the coffee machine or block the funnel (A4).
•
When using pre-ground coffee, only one cup can be made
at a time.
1. Press the
button (C1) until "
displayed.
2. Then select your required coffee:
• ESPRESSO
• LONG
• COFFEE
3. "ADD GROUND COFFEE MAX. ONE MEASURE": open the lid
of the pre-ground coffee funnel (A2).
4. Make sure the funnel (A4) is not blocked, then add one
level measure of pre-ground coffee (fig. 11).
10
5. Place a cup under the coffee spouts (A9) (fig. 10).
6. Press
: Preparation begins. An image of the
selected beverage appears on the display, together with a
progress bar which gradually fills as preparation proceeds.
Once the coffee has been made, the appliance is ready to make
the next beverage.
Important! Making LONG coffee:
Halfway through preparation, the machine requests a fur-
ther level measure of pre-ground coffee. Proceed, then press
.
7.5 Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5) (fig. 12).
" (ground) is
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation during the initial phase of coffee
preparation.
a drop at a time).
The effect of the adjustment will be noticed only after making
a further 2 cups of coffee, at least. If this adjustment does not
produce the desired result, turn the dial another click.
7.6 Tips for a hotter coffee
To make a hotter coffee, proceed as follows:
•
perform a rinse cycle by selecting the "Rinse" function (sec-
tion "6.3 Rinse " );
11
•
warm the cups with hot water using the hot water function
(see section "10. Delivering hot water );
•
increase the coffee temperature (section "6.9 Coffee tem-
perature "). Varying the temperature has most effect for
long beverages.
10
12
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coffee could be delivered
1
Advertisement
Table of Contents
Troubleshooting
