Switching Off For Extended Periods; Settings Menu; Access The Menu; Exit The Menu - DeLonghi DINAMICA plus Instructions For Use Manual

1. To turn the appliance off, press the
7).
2. If provided for, the appliance performs a rinse cycle then
goes off (stand-by).

6.1 Switching off for extended periods:

If the machine is not going to be used for any length of time (e.g.
holidays, periods of absence), proceed as follows:
• turn the appliance off by pressing the
• empty out and clean the grounds container (A11) and the
water tank (A17);
• unplug the power cord (A7) from the socket.
Please note:
When turning the machine on again, fill the water tank and,
before making any kind of drink, run 3 rinse cycles as indicated
in section "6.3 Rinsing."
Important!
Always turn the appliance off with the
or, in the case of models having a main switch, set the switch to
the 0 position, before unplugging from the mains socket.

7. SETTINGS MENU

7.1 Access the menu

1. Press the button(C3) to enter the menu;
2. Scroll through the menu items by pressing
until the required item is displayed;
3. Press the menu item you want to select.

7.2 Exit the menu

Having made the desired adjustments, press
the homepage reappears.
7.3

Rinse

Use this function to deliver hot water from the coffee spouts
(A9) to clean and heat the appliance's internal circuit.
1. Place a container of at least 100ml capacity under the cof-
fee spouts (fig. 8).
2. A few seconds after "RINSE" has been selected, hot water
is delivered from the coffee spouts to clean and heat the
appliance's internal circuit (fig. 8).
3. To stop rinsing, press
stop automatically.
Please note
After cleaning, it is normal for the grounds container (A11) to
contain water.

7.4 Descaling

For instructions on descaling, see section "13. Descaling".

7.5 Cleaning the carafe

button (A7) (fig.
For instructions on cleaning the milk carafe (E3), see section"15.
Water softener filter".

7.6 MY programme

Pressing the
to customize their drink (see section "11. Customizing drinks").
button (fig. 7);

7.7 Coffee temperature

To change the temperature of the water used to make the cof-
fee, proceed as follows:
1. Press
2. Press the value you want to set (LOW, MEDIUM, HIGH).
Please note:
Varying the temperature has most effect for long drinks.

7.8 Drinks settings

button (standby)
In this section, you can consult your customized settings and, if
you wish, reset the default values for each drink.
1. Once in the settings menu, press "DRINK SETTINGS". The
2. The values are displayed on vertical bars. The default value
3. To scroll and display the drinks, press
4. To reset the default values for the drink displayed, press
5. "CONFIRM RESET?": to confirm, press
until
6. ""DEFAULT VALUES SET": press
The drink has been reset to the default values. Proceed with
the other drinks or go back to the homepage by pressing

7.9 Water filter

For instructions on how to install the filter (D4), see section "15.
Water softener filter".

7.10 Water hardness

or wait for rinsing to
For instructions on setting water hardness, see section "14. Set-
ting water hardness".

7.11 Auto-off (standby)

Auto-off can be set so that if the appliance is not being used, it
will switch off after 15 or 30 minutes or after 1 or 3 hours have
elapsed.
To programme Auto-off, proceed as follows:
1. Press "AUTO-OFF";
9
button, users can choose under which profile
"COFFEE TEMPERATURE"
pear on the display (the current value is underlined);
values for the first drink appear on the display;
is indicated by the symbol, while the current value is
highlighted by the solid part of the vertical bar;
;
cel, press );
twice.
.
. The selectable values ap-
;
(to can-
.