Table of Contents
Advertisement
4. TURNING THE APPLIANCE ON
Please note!
•
Before turning the appliance on, make sure the main
switch (A23) is pressed in (fig. 1B).
•
Each time the appliance is turned on, it performs an auto-
matic preheat and rinse cycle which cannot be interrupted.
The appliance is not ready for use until the cycle has been
completed.
1. To turn the appliance on, press the
7): the appliance comes on;
2. When at temperature, the appliance performs a rinse cycle
delivering hot water from the coffee spouts (A9). As well
as heating the boiler, this also heats the internal circuits by
circulating hot water.
The appliance is ready for use when the main screen (home-
page) appears.
5. TURNING THE APPLIANCE OFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
Danger of scalding!
During rinsing, a little hot water comes out of the coffee spouts
(A9) and is collected in the drip tray (A15) underneath. Take care
to avoid contact with splashes of water.
1. To turn the appliance off, press the
(fig. 7).
2. The appliance performs a rinse cycle then goes off
(stand-by).
3. Release the main switch (A23) at the back of the appliance
(fig. 1B).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket.
Important!
Never unplug while the appliance is on.
6
button (A15) (fig.
button (A15)
6. MENU SETTINGS
6.1 Access the settings menu
1. Press the "
2. Scroll through the menu items by pressing
until the required item is displayed;
3. Press the menu item you want to select.
6.2 Exit the menu
When you have made the adjustments, press
you are back on the homepage.
7
6.3
Rinse
Use this function to deliver hot water from the coffee spouts
(A9) to clean and heat the appliance's internal circuit.
1. Place a container with a minimum capacity of 100ml under
the coffee spouts (fig. 8).
2. A few seconds after "RINSE" has been selected, hot water
is delivered from the coffee spouts to clean and heat the
appliance's internal circuit (fig. 8).
3. To stop rinsing, press
stop automatically.
Please note!
•
If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2/3 rinses before use;
•
After cleaning, it is normal for the grounds container (A11)
to contain water.
6.4 Descaling
For instructions on descaling, see section "14. Descaling".
6.5 Water filter
For instructions on how to install the filter (D6), see section "16.
Water softener filter".
6.6 Beverages settings
In this section, you can consult your customised settings and, if
you wish, reset the default values for each beverage.
1. Once in the settings menu, press "DRINK SETTINGS". The
values for the first beverage appear on the display;
2. The values are displayed on vertical bars. The default value
is indicated by the
highlighted by the solid part of the vertical bar;
3. To go back to the settings menu, press
scroll and display the beverages, press
4. To reset the default values for the beverage displayed,
press
5. "CONFIRM RESET?": to confirm, press
cel, press
7
" button (C3) to enter the menu;
or wait for rinsing to
symbol, while the current value is
;
);
until
. To
;
(to can-
Advertisement
Table of Contents
Troubleshooting
