Table of Contents
Advertisement
After delivering the beverage, the quantity setting is reset to the
value
7.4 Making coffee using pre-ground coffee
Important!
•
Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty
it. This could damage the machine.
•
Never use more than 1 level measure (D2) as it could soil
the inside of the coffee machine or block the funnel (A4).
•
When using pre-ground coffee, only one cup can be made
at a time.
1. Press the
button (C1) until "
displayed.
2. Open the pre-ground coffee funnel lid (A2).
3. Make sure the funnel (A4) is not blocked, then add one
level measure of pre-ground coffee (fig. 12).
4. Place a cup under the coffee spouts (A9).
5. Then select your required coffee:
• ESPRESSO
• LONG
• COFFEE
6. Preparation begins. An image of the selected beverage
appears on the display, together with a progress bar which
gradually fills as preparation proceeds.
Once the coffee has been made, the appliance is ready to make
the next beverage.
Important! Making LONG coffee:
Halfway through preparation, the machine requests a fur-
ther level measure of pre-ground coffee. Proceed, then press
.
7.5 Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
Custom (if programmed) /
Standard (see table in sec-
tion "11. Customising the
beverages"
SMALL SIZE
MEDIUM SIZE
LARGE SIZE
X-LARGE SIZE
" (ground) is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5) (fig. 13).
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation during the initial phase of coffee
preparation.
a drop at a time).
The effect of the adjustment will be noticed only after making
a further 2 cups of coffee, at least. If this adjustment does not
produce the desired result, turn the dial another click.
7.6 Tips for a hotter coffee
For hotter coffee, proceed as follows:
•
perform a rinse cycle by selecting the "Rinsing" function in
the settings menu (section "6.3 Rinse ");
•
warm the cups with hot water using the hot water function
D
(see section"10.
•
increase the coffee temperature in the settings menu
"
" (C3) (see section "6.9 Coffee temperature
ying the temperature has most effect for long beverages.
8. COFFEE POT
1. Position a carafe under the coffee spouts (A9). When
choosing the carafe to use, bear in mind the quantity to
be delivered, namely:
Selected quantity
2. Press "COFFEE POT";
3. Select the aroma and number of cups;
4. Press
5. After a few seconds, preparation begins automatically and
an image of the selected beverage appears on the display,
together with a progress bar which gradually fills as prepa-
ration progresses.
Once the coffee has been made, the appliance is ready to make
the next beverage.
11
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coffee could be delivered
Delivering hot water");
Quantity (ml)
250
500
750
.
"
). Var-
Advertisement
Table of Contents
Troubleshooting
