Biasi RINNOVA COND 24S User Manual And Installation Instructions page 70

rameters (Figure 9.34).
• Press 12 and hold until the LCD display
shows the code A12, indicating entry into
"parameter A12" (Figure 9.35).
Figure 9.35
• Use 15 or 16 (Figure 9.23) to change the
value of parameter A12 (Figure 9.36).
03 = Default
04 = Correct
Figure 9.36
• Press 12 (Figure 9.23) to confirm the val-
ue entered and return to the list of param-
eters (Figure 9.35).
• Press 12 and hold until the LCD display
shows the code A21, indicating entry into
"parameter A21" (Figure 9.37).
Figure 9.37
• Use 15 or 16 (Figure 9.23) to change the
value of parameter A21 (Figure 9.38).
00 = Room thermostat
01 = Remote control
- 70 -
MAINTENANCE
RESET
bar
RESET
bar
RESET
bar
Figure 9.38
• Press 12 (Figure 9.23) to confirm the val-
ue entered and return to the list of param-
eters (Figure 9.37).
• Press 12 and hold until the LCD display
shows the code A38, indicating entry into
"parameter A38" (Figure 9.39).
Figure 9.39
• Use 15 or 16 (Figure 9.23) to change the
value of parameter A38 (Figure 9.40).
60 = Default
10 = Correct
Figure 9.40
• Press 12 or 13 (Figure 9.23) to confirm the
value entered and return to the list of pa-
rameters (Figure 9.39).
• Press 17 (Figure 9.23) to exit "program-
ming mode".
RESET
bar
RESET
bar
RESET
bar