High Security Mode - Wacom Cintiq Pro 32 Manual

High Security Mode

In high security mode, the discovery bootstrap phase is disabled. All settings must be manually
configured, and certificates are required:
• The client is not discoverable by endpoint managers.
• The client must be manually configured with the endpoint managers' internal (and, optionally,
external) URI.
• The client must have an installed certificate to trust the endpoint manager.

Certificates are installed by an endpoint manager
If a certificate for the endpoint manager has not previously been installed by an endpoint manager in the client's
certificate store, one must be installed. See See

Additional Security Tip
Teradici recommends disabling the AWI interface to reduce the attack surface on the Zero Client. Teradici
recommends exclusively using the PCoIP Management Console to configure the Zero Client.
© 2020 Teradici
High Security Mode
Staging Clients Using an Endpoint Manager.
200