Table of Contents
Advertisement
3. Double-click the correct
4. Click Upload.
5. Click OK to confirm that you want to proceed with the upload. The operation may take a few
minutes. When completed, the AWI page displays two buttons: Reset and Continue.
6. Click Reset.
7. Click OK.
Important Information
If you're connecting to a PCoIP Remote Workstation Card, it is recommended that the host and client use compatible
firmware releases. Refer to your Zero Client and Remote Workstation Card firmware release notes for compatibility
details.
As of firmware 5.0.0, Tera2 PCoIP Zero Clients and PCoIP Remote Workstation Cards have separate *.all files for
uploading firmware to the device.
If you want to downgrade the firmware to an earlier version, Teradici recommends that you first reset the device
parameters to the factory defaults, upload an earlier version of the firmware, and reconfigure your device settings. To
reset the device, see
© 2020 Teradici
firmware file.
*.all
Resetting Your Tera2 PCoIP Zero
Uploading Firmware
Client.
209
Advertisement
Table of Contents
