Table of Contents
Advertisement
Parameter
Primary
Position
Rotation
Resolution
To configure display settings:
1. From the OSD, select Options > User Settings > Display Topology.
2. From the OSD Display Topology page, configure the settings for the attached displays.
3. Click OK.
Configuring Four Displays
If your Tera2 PCoIP Zero Client supports four attached displays, The OSD Display Topology page,
as shown next, enables you to configure the display topology for the attached displays.
© 2020 Teradici
Description
Configure which video port on the Tera2 PCoIP Zero Client you want as the primary port.
The display that is connected to the primary port becomes the primary display (that is, the display that
contains the OSD menus before you initiate a PCoIP session and the display that is requested
for the Windows taskbar after you initiate the session).
• Port 1: Select to configure port 1 on the Tera2 PCoIP Zero Client as the primary port.
• Port 2: Select to configure port 2 on the Tera2 PCoIP Zero Client as the primary port.
Specify which display is physically connected to each port.
Configure the rotation of the display in each port:
• No rotation
• 90° clockwise
• 180° rotation
• 90° counter-clockwise
The display resolution can be configured for a PCoIP session between a virtual machine or host
and a Tera2 PCoIP Zero Client. The Tera2 PCoIP Zero Client detects the supported display
resolutions of the monitor and populates them to the drop-down menu. By default, the display's
native resolution is used.
Configuring Four Displays
334
Advertisement
Table of Contents
